BENDIX BW1435 User Manual download pdf

SD-03-4510

DESCRIPTION

In a trailer air brake system, the SR-2

™

spring brake

valve controls the functioning of the spring brakes during

parking and emergency applications. It is responsible for

automatically applying the spring brakes and preventing

trailer air pressure loss in the event of breakaway or supply

line failure. The SR-2

™

valve also prevents the automatic

application of the trailer spring brakes after the loss of trailer

service reservoir pressure while allowing failure indication

to occur in the tractor.

The SR-2

™

valve is provided with one 3/4” male pipe thread

connection for mounting the valve to the trailer brake

reservoir. Other porting includes:

One - 1/4” pipe thread supply port

Four - 3/8” pipe thread delivery ports

Two - 1/4” pipe thread service reservoir ports

One - 3/8” pipe thread exhaust port

OPERATION

CHARGING (Figure 2)

Air from the trailer supply line enters the SR-2

™

valve

trailer supply port and moves the control piston into contact

with the control inlet and exhaust valve, sealing off the

exhaust passage through the control piston, and opening

the inlet. Air entering the supply port is also conducted

to the underside of the pressure protection piston. When

air pressure builds to approximately 55 psi beneath the

pressure protection piston, the piston moves against the

force of the piston spring and the pressure protection inlet

valve opens and remains open. Air ﬂ owing past the open

pressure protection valve opens the service reservoir check

valve. Air passing through the service reservoir check

Bendix

SR-2

™

Trailer Spring Brake Valve

RETAINER

DIAPHRAGM (11)

(19) SCREW

(20) WASHER

BODY

PARTIAL VIEW OF EXHAUST

FOR PC. NO. 287376

EXTERIOR

SECTIONAL

CHECK VALVES (10)

(SHOWN OUT OF

POSITION)

SCREW (16)

CHECK VALVE (10)

RETAINER (17)

SPRING (9)

PISTON (8)

O-RING (2)

COVER (12)

CAP SCREW (13)

O-RINGS (1)

CONTROL

PISTON (14)

SEAL RING (4)

EXHAUST PORT

SPRING (3)

VENT

INLET/EXHAUST

VALVE (5)

INLET VALVE

SPRING (6)

O-RING (7)

RES.

FTG.

(15)

FIGURE 1

1 2 3 4 5 6

Summary of Contents

Page 1 - Trailer Spring Brake Valve

1 SD-03-4510DESCRIPTIONIn a trailer air brake system, the SR-2™ spring brake valve controls the functioning of the spring brakes during parking and em

Page 2

2valve ﬂ ows out the service reservoir port and then opens the spring brake reservoir check valve, allowing air to ﬁ ll the spring brake reservoir. As

Page 3 - SERVICE AND LEAKAGE TESTS

3SERVICE SYSTEM FAILURE (Fig. 5)If air pressure is reduced in the service system, pressure in the trailer supply line (and likewise in the tractor) wi

Page 4 - REMOVAL OF VALVE FROM VEHICLE

42. Place the trailer supply valve in the exhaust position; the spring brakes should be applied, Disconnect the trailer supply line and soap the hose

Page 5 - INJURY OR DEATH:

5287691 the revised check valve assemblies are included in the kit and the old ones should be discarded. If the old ones are being reused, the followi

Page 6

Comments to this Manuals

No comments

BENDIX BW1435 User Manual

Browse online or download User Manual for Engine BENDIX BW1435. BENDIX BW1435 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Engine BENDIX BW1435