BENDIX BW2187 User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
1st 2nd
Digit Digit Fault Description Repair Information
ABS Modulators (Continued)
6 3 Mod 1 Shorted to Ground
6 9 Mod 2 Shorted to Ground
6 4 Mod 1 Shorted Solenoid
6 10 Mod 2 Shorted Solenoid
6 5 Mod 1 Shorted to VBAT
6 11 Mod 2 Shorted to VBAT
6 6 Mod 1 Shorted Between
6 12 Mod 2 Shorted Between
ABS Warning Lamp
71
Trailer ABS - Warning Lamp
Shorted to VBAT
7 2 Trailer ABS Warning Lamp Open
73
Trailer ABS Warning Lamp
Shorted to Ground
1st 2nd
Digit Digit Fault Description Repair Information
Wheel Speed Sensors (Continued)
2 9 LF Sensor High Frequency Noise
3 9 RF Sensor High Frequency Noise
4 9 LR Sensor High Frequency Noise
5 9 RR Sensor High Frequency Noise
2 10 LF Sensor Wobble Run
3 10 RF Sensor Wobble Run
4 10 LR Sensor Wobble Run
5 10 RR Sensor Wobble Run
4 11 LR Sensor Gross Mismatch
5 11 RR Sensor Gross Mismatch
2 12 LF Sensor Abnormal Speed
3 12 RF Sensor Abnormal Speed
4 12 LR Sensor Abnormal Speed
5 12 RR Sensor Abnormal Speed
ABS Modulators
6 1 Mod 1 Lock Time Out
6 7 Mod 2 Lock Time Out
6 2 Mod 1 Open / Shorted to GND
6 8 Mod 2 Open / Shorted to GND
Verify condition and retention force of sensor clips. Check for corroded or damaged
sensor and ECU wiring and connectors. Verify no continuity from sensor leads to
ground. Verify sensor leads are twisted pair.
Sensor output intermittent or excessive wobble in exciter ring. Verify condition of tone
ring mounting and teeth. Verify proper adjustment of wheel bearings. Adjust speed
sensor to contact tone ring. Rotate wheel and verify minimum 0.8 volts AC sensor output
@ 1 RPS. Verify condition and retention force of sensor clip. Verify proper sensor lead
routing and clamping.
Tire Size Mismatch. Verify correct tire size as desired. Verify proper tire inflation. Verify
proper number of tone ring teeth per sensed wheel. Verify proper wheel rolling radius
setting in ECU.
Adjust speed sensor to contact tone ring. Verify proper number of tone ring teeth per
sensed wheel. Rotate wheel and verify minimum 0.8 volts AC sensor output @ 1 RPS.
Verify condition and retention force of sensor clip. Verify proper sensor lead routing and
clamping.
No wheel response to ABS command. Verify proper modulator activation with brake
pressure applied, at power-up (Chuff Test) and/or using diagnostic tool. Wiring to modu-
lator may be reversed. Possible slow brake release. Check for dragging brakes, dry
bearings, faulty return springs, parking brake system faults, restricted brake air lines,
over adjusted slacks, out of round drums or damaged/ loose tone rings.
Check for corroded or damaged modulator wiring and connections. Verify 7.0 to 10.0
OHMS across HOLD/COMMON. Verify 7.0 to 10.0 OHMS across EXHAUST/
COMMON. Verify 14.0 to 20.0 OHMS across EXHAUST/HOLD. Verify no continuity from
modulator leads to ground.
Check for corroded or damaged modulator wiring and connections. Verify no continuity
from modulator leads to ground. Verify 7.0 to 10.0 OHMS across HOLD/COMMON. Verify
7.0 to 10.0 OHMS across EXHAUST/COMMON. Verify 14.0 to 20.0 OHMS across
EXHAUST/HOLD.
Check for corroded or damaged modulator wiring and connections. Verify 7.0 to 10.0
OHMS across HOLD/COMMON. Verify 7.0 to 10.0 OHMS across EXHAUST/COMMON.
Verify 14.0 to 20.0 OHMS across EXHAUST/HOLD.
Check for corroded or damaged modulator wiring and connections. Verify +12V is not
measured at any modulator lead. Verify 7.0 to 10.0 OHMS across HOLD/COMMON. Verify
7.0 to 10.0 OHMS across EXHAUST/COMMON. Verify 14.0 to 20.0 OHMS across
EXHAUST/HOLD.
Check for corroded or damaged modulator wiring and connections. Verify 7.0 to 10.0
OHMS across HOLD/COMMON. Verify 7.0 to 10.0 OHMS across EXHAUST/COMMON.
Verify 14.0 to 20.0 OHMS across EXHAUST/HOLD.
Check ABS warning lamp wiring and connections. Verify proper illumination of
warning lamp at power-up.
MC-30 Configuration Blink Code Display
MC-30 BLINK CODE DEFINITIONS
1st Digit Sensor
2 2 Sensors
3 4 Sensors
2nd Digit Modulators
1 1 Modulator (Dolly-Axle control)
2 1 Modulator (Axle control)
3 2 Modulators (Axle control)
4 2 Modulators (Side control)
Page view 3
1 2 3 4

Comments to this Manuals

No comments

Yamaha II manuels

Manuels d'utilisation et guides de l'utilisateur pour Instruments de musique Yamaha II.
Nous fournissons des manuels en pdf 1 Yamaha II à télécharger gratuitement par type de document : Manuel de l'utilisateur






Plus de produits et de manuels pour Instruments de musique Yamaha

Modèles Type de document
MU1000 Manuel de l'utilisateur   Standard Equipment List, 1 pages
SLG-100N Manuel de l'utilisateur   SLG-100N/120NW, 17 pages
U1-SILENT Manuel de l'utilisateur   U1 Silent - Bertet Musique, 1 pages
SILENT PIANO SG2 Manuel de l'utilisateur    Silent Piano SG2, 37 pages
RS7000 Manuel de l'utilisateur   Yamaha RS7000 Live Performance Howto - T-com, 7 pages
P-65 Manuel du propriétaire   Yamaha P-65 Owner`s manual, 76 pages
P-60 Manuel   Yamaha P-60 User manual, 40 pages
CLP-380 Manuel du propriétaire   Yamaha CLP-380 Owner's manual, 136 pages
NP-31 Guide de l'utilisateur Yamaha NP-31 User manual [en] , 2 pages
QY70 Manuel de l'utilisateur          Yamaha QY70 User manual, 68 pages
DD-55 Manuel du propriétaire   Yamaha DD-55 Owner's manual [en] , 47 pages
NP-V80 Manuel de l'utilisateur     Yamaha NP-V80 Benutzerhandbuch, 5 pages
CLP-320 Manuel de l'utilisateur   Yamaha CLP-320 User manual, 6 pages
PSR-A350 Manuel du propriétaire   Yamaha PSR-A350 Owner's manual [en] , 80 pages
PSR-E453 Manuel de l'utilisateur          Yamaha PSR-E453 User manual [ja] [zh] , 28 pages
PSR-S500 Manuel du propriétaire   Yamaha PSR-S500 Owner's manual, 122 pages
YDD-60 Manuel   Yamaha YDD-60 User manual, 60 pages
PSRGX76 Manuel du propriétaire   1 Make all desired settings for the PSR-GX76., 92 pages
AW4416 Manuel de l'utilisateur   Yamaha AW4416 User manual, 20 pages
YDP-160 Manuel de l'utilisateur   Yamaha YDP-160 User manual, 6 pages