BENDIX washing machine Specifications download pdf (Page 11)

To start the selected programme, press the “start pause”

button; the corresponding light stops flashing.

Only the “wash” pilot light stays on.

The “door” light comes on to indicate that the door is

locked.

The machine starts operating.

8. At the end

of the programme

The machine stops automatically.

If the “rinse hold” option has been selected, the phase

light “end” and the “door’ light are on to indicate that

the water must be emptied out before opening the door.

To do this first turn the programme selector dial to “O”

and then to drain programme 14 or spin programme

In this case reduce the spin speed by means of the

relevant button to adapt it to the fabrics to be spun.

The door can only be opened after the relevant pilot light

on the control panel has gone out.

Release of the lock is also indicated by the coming on of

the “end” light.

Turn the programme selector dial to “O” to switch the

machine off.

Remove the laundry from the drum and carefully check

that the drum is empty.

If you do not intend to carry out another wash, close the

water tap.

Leave the door open to prevent the formation of mildew

and unpleasant smells.

start

pause

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

BENDIX washing machine Specifications Page 11