BENDIX TCH-001-042 User Manual download pdf

Technical Bulletin

Bulletin No: TCH-001-042 Effective Date: 2/1/96 Cancels: NA Page: 1 of 1

Subject:

TU-FLO 550/750 UNLOADER GASKET

It has come to our attention that there is a misunderstanding regarding the function of the

unloader cover plate and gasket used on the Tu-Flo 550 and 750 compressors. Both

compressors are designed with an internal unloader that operates using air pressure

delivered from the governor. What is often misunderstood is that the gasket installed

between the cylinder head and unloader cover plate contains the air passages that allows air

pressure to travel from the governor to the unloader pistons. The gasket is specifically die

cut to accommodate the proper air flow from the governor port on the cylinder head to the

unloader pistons. Use of a solid gasket or gasket forming materials such as RTV will block

the passage of air to the compressor unloader mechanism which will result in a failure of the

compressor to unload. Failure to unload will cause over pressurization of the compressor,

which can cause permanent compressor damage and early failure.

Unloader Kit Piece Number 107515 contains the appropriate die cut gasket and must be

used when servicing the unloader mechanism to ensure proper operation.

Technical BulletinBulletin No: TCH-001-042 Effective Date: 2/1/96 Cancels: NA Page: 1 of 1Subject:TU-FLO 550/750 UNLOADER GASKETIt has come to our

No comments

BENDIX TCH-001-042 User Manual